Simply Print

USM Client Day

Simply Print — Wed, 30 Jun 2010 03:32:53 +0000

Pictures on the day!!

How to scan??

Simply Print — Mon, 07 Jun 2010 05:47:35 +0000

1. Press the “PaperLogic” button at the printer screen.

2. Wait until the printer instructs you to access the matrix card. Wave your matrix card at the yellow label.

3. Once the menu show on the screen, plug in your thumb drive into USB port on the printer body, and then press “Scan” button.

4. Enter you desired filename and press “Next”.

5. Change your paper size by pressing on the “Original Size” button. Choose the highest resolution for better result and press on “Color” button to scan color paper.

6. Choose to save your documents in PDF or TIFF or JPEG format.

7. If you wish to preview your scanning document, press “Advanced Options” button and choose “Scan Preview”.

8. Turn it “ON” and press “Done” button. After that press “Scan It” button to start scanning.

9. “Accept and Continue” button to continue scanning. “Discard” button to delete the unwanted scanned file. “Finish the Job” to save all the scanned files.

10. LOGOUT after finish.

How to copy??

Simply Print — Tue, 04 May 2010 06:06:09 +0000

1. Press the “PaperLogic” button at the printer screen.

2. Wait until the printer instructs you to access the matrix card. Wave your matrix card at the yellow

label.

3. Once the menu show on the screen, press “Copy” button.

4. Change your paper size by clicking at “Copy From” button. Then press “Copy It” button to start copying.

5. Press “Scan the next page” to continue copying and press “Finish the job” after done copying.

6. LOGOUT after done.

How to release print job??

Simply Print — Tue, 04 May 2010 05:39:15 +0000

1. Press the “PaperLogic” button at the printer screen.

2. Wait until the printer instructs you to access the matrix card. Wave your matrix card at the yellow

label.

3. Once the menu show on the screen, press “Print” button.

4. Tick on the documents that you want to print and press “Print” button.

5. LOGOUT after done.

Note: You can delete the unwanted documents by ticking on the doc and press “Delete” button.

Please proceed to our counter if there is any problem occurred. Do not cancel the print job that you have sent.

How to print??

Simply Print — Tue, 09 Mar 2010 04:47:31 +0000

Go to Internet Explorer (note: other search engine could not run the software) and key in usm.lib.paperlogic.my
Click on “Click here to start print service” and wait for the software to launch.

Once the box popup, key in your username and password that will be given upon registration.
Then click “Login”

Wait for the icon at the taskbar. It will shows a message “Starting.Please wait…” and followed by “Started.You can printing now”
Go to the documents that you want to print. Make sure you choose “Paperlogic” printer.

Wait until the taskbar show “Print (Success)” (Note: If the notification showed “Print failed”, you are advised to do it again.)

Please EXIT Paperlogic after you finish your printing job by right click at the Paperlogic icon at the taskbar ( Noted: failure to do so will allow the next users print using your account)

Release the documents at ANY of LEXMARK printers.

How to register??

Simply Print — Tue, 09 Mar 2010 03:30:45 +0000

1. Drop by at our counter at INTERNET ROOM, LIBRARY 1

2. Register your matrix card and TopUp minimum RM5

(NO expiry date on the topup value)

3. You can start printing, photocopying and scanning IMMEDIATELY!!!

** Collect TopUp value RM 50 and you will get RM 5 for FREE!!!**